Boost Referenced Return System for 1800+ rwhp. Regulator mounted before rails. (pre-regulated) Parallel feed to fuel rails, with plug on end of each rail. We generally do not recommend this configuration since fuel vapor is trapped in the rails during starting and the fuel density may be inconsistent due to fuel stagnation.
- Cherokee WK2 Fuel Pump Module (triple pump)
- F4i Fuel Pressure Regulator
- FCV Checkvalve
- 88mm Inline Fuel Filter
- Billet Hellcat Hemi Fuel Rails
- All fittings, hose, hardware required for typical fuel line plumbing
- 30 feet of fuel line and 10 matching hose ends (your choice)
- Qty 6, billet low profile 90 degree o-ring fittings
- Qty 4, straight AN to ORB fittings
- Qty 3, -8 ORB plug
- Qty 2, -8 ORB 1.25″ port extensions
- Qty 10, hose straps and mounting screws
Notes on Hellcat OE Fuel Pressure Sensor Options:
By default, our fuel system will delete the OE fuel pressure sensor. Due to popular request, we have added the following provisions for the fuel pressure sensor, which must be selected by the purchaser:
- Delete OE Fuel Pressure Sensor
- Inline Aftermarket Sensor: includes a new AC Delco sensor and provisions to mount in a high flow coupling with two more hose ends. In L2 and L4 systems, this can be installed without extending the OE electrical harness; however, extension of the OE harness may still be required on L3 systems.
- Regulator Mounted Aftermarket Sensor: includes a new AC Delco sensor and an adapter to mount directly on the fuel pressure regulator. The installer will have to extend the OE electrical harness to accommodate the new location of the sensor.
There are no reviews yet.